2010 Hyundai Santa Fe Abs And Tcs Lights Are On
2010 Hyundai Santa Fe Abs And Tcs Lights Are On. 2 answers 2003 hyundai santa fe abs light is on along with tcs light you may have damaged the abs sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the abs sensor on the spindle jul 14, 2009 • 2003 hyundai santa fe 0 helpful 1 answer There is a pulsing sound and the brakes pulse very hard when the abs and tac lights come on, the brakes act normally but without abs assistance.
Posted on jul 15, 2009 Typically, corrosion is the most common reason why the module fails. Share your experience with others.
My Tcs&Abs Lights Keep Coming On And I Notice At Certain Speeds My Brakes Act Weird,It Goes Away Though.
You may have damaged the abs sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the abs sensor on the spindle. 2003 hyundai santa fe abs light is on along with tcs light. My abs/tcs lights came on.
If It Abs/Esc Lit Up, There Should Be A Stored Code, Either Present, Or Tagged H (History).
Abs light on how to fix 1 answer 1,485 nismo1183 answered 7 years ago somtimes if they flash before going solid on startup it could be a code that you can google watch and count the flashes then google it 5 people found this helpful. 2 answers 2003 hyundai santa fe abs light is on along with tcs light you may have damaged the abs sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the abs sensor on the spindle jul 14, 2009 • 2003 hyundai santa fe 0 helpful 1 answer Abs fluid level if the fluid level is too low to keep pressure in the abs lines, the abs light will come on.
Can This Be Fixed Without Taking It To The Shop???
Best answer mark helpful shortcuts hyundai santa fe questions all questions ask a question hyundai santa fe for sale Ask your own hyundai question. Chilton has not released a repair manual.
Mark Helpful 70 Cactus1304 Answered 3 Years Ago
The most probable cause of this concern is a cracked tone ring on one of the drive axles. An obdii scanner can read trouble codes stored in the ecu, but you need a mechanic to test these codes to identify the cause and corresponding fix for the issue. Without the pressure the abs will no longer be able to physically activate.
A Typical Abs Sensor Will Cost About $80 To $125 However, On Some Makes And Models The Sensor Is Part Of A Hub/Bearing Assembly (Gm, Ford, Some Others) And The Price Will Rise To Around $350.
I have an 02 santa fe with the tcs & abs lights on. What could be the problem? Abs light on how to fix 1 answer 1,405 nismo1183 answered 6 years ago somtimes if they flash before going solid on startup it could be a code that you can google watch and count the flashes then google it 4 people found this helpful.
Post a Comment for "2010 Hyundai Santa Fe Abs And Tcs Lights Are On"