Skip to content Skip to sidebar Skip to footer

Widget HTML #1

Diagram Of How A Radiator Works

Diagram Of How A Radiator Works. But the bigger heat contribution of a radiator is through convection. When the fluid pressure inside the radiator exceeds 15 psi, it forces the valve open, allowing heat to escape and excess coolant fluid to overflow into the tanks on either side of the radiator.

Radiator: Definition, Functions, Parts, Diagram, Working - Studentlesson
Radiator: Definition, Functions, Parts, Diagram, Working - Studentlesson from studentlesson.com

But the bigger heat contribution of a radiator is through convection. The radiator is a reservoir that carries the hot coolant in order to be cool before returning to the engine for cooling. The cap that is on the radiator is more than your average top to a soda bottle.

As You Can Imagine, The Boiler (And Therefore The Hot Water Function) Has To Be 'On' Before The Heating Will Work.


The fan blows the air and cools down the water. The following diagram shows the detailed cut out of the radiator. Finned tube radiators are the most widely used heat exchange equipment in gas and liquid heat exchangers.

The Radiators Are Controlled By Turning The Pump On And Off, This Being Done Automatically By A Room Thermostat.


A cracked radiator will allow the coolant to leak from the. The diagrams will show you where everything is supposed to go, and how it is supposed to fit together. Learn more about how a radiator cap works from this article.

In Radiator, The Coolant Flows From The Inlet To The Outlet Through Many Tubes Mounted In A Parallel Arrangement.


A copper pipe or the like. As the system cools, the radiator cap acts as a “two way” valve and will pull coolant from the into the radiator as needed. The radiators are connected with the boiler and these radiators are made of small tubes.

Radiators Work Through A Heat Transfer Process Called Convection.


A full day is needed for a complete system including around 10 radiators. These diagrams are great for those who are considering repairing or replacing the cooling system on their own. Then coolant and water get released from the radiator and sent through the engine to absorb this heat.

It Is Designed To Transfer Heat From The Hot Coolant That Flows Through It To The Air Blown Through It By The Fan.


The radiator is a reservoir that carries the hot coolant in order to be cool before returning to the engine for cooling. And a fan is attached on behind the radiator to cool down the hot water in the tubes. A radiator uses radiant energy to transfer heat to the air through electromagnetic waves, similar to the heat from a stove or an open fire.

Post a Comment for "Diagram Of How A Radiator Works"